Mechanical External Cutter

Product Detail

Mechanical External Cutter

Technical Features

WD-J type is are automatic spring-fed cutters that provide fast, efficient,

External cutting and recovery of long sections of tubing, drill pipe, casing, and the corresponding size pipe fish. The spring-fed feature prevents excessive strain from being applied from the rig floor, which could cause the knives to burn or break.

Work Principle

After the tool connected with the wash over pipe under to the predetermined cutting position, lift the cutter, the spring dog inside the cutter on the preload sleeve withstands the shoulder of fish sub.

If we continue to lift, the body through shear pins impels feed ring together upward movement, the spring stress compression, When the lift force over shear pins load, shear pins cut off .The spring impels the feed link downward movement: and it could let the knives rotary to the cutter center. Rotary tool, the spring impels the feed ring gradually downward to feed knives with the function the spring elastic potential energy, until the fish cut off, after cut off the fish, the preload sleeve card tight wrap catches the fish which cuts off to extract together.

When ordering please specify

● Hole size;

● Pipe O.D to be cut;

● Top connection.

Technical Parameters

Model	Product Code	O.D. (mm)	Dimension of cutting fish (mm)	Max. joint O.D. of cutting fish (mm)	Recommend connection BOX	Lifting fish capacity KN	Shear force of shear pin KN	Axial force of push knife KN
WD-J102×154	X05-102100	154	101.6	121	5 1/2LCSG	20	10-20	10-30
WD-J140×206	X05-140100	206	139.7	165	Users homemade	20	10-20	10-30